WHAT IS THE EASYswitch
The ability to switch 240 volt or 110 volt mains power safely and simply is achieved by this locally made, fully approved device.
The EASYswitch provides on - off control of the mains between its industry standard universal IEC power connectors.
Control contacts do not need extra licenced electrical wiring to power mains equipment.
Requiring only a volts free contact closure to switch the full mains supply, it can be operated from kilometres away over basic telephone wire
by a simple switch, relay contact or open collector transistor as used in controllers, A/V and Security equipment.
Rugged relay capacity of 1 pole 16A, 1 form C (CO) contact for inrush peak currents up to 30A maximum for 4 seconds.
With user selectable mains supply (240V or 110V), and selectable output supply via IEC connectors of normally open (NO) or normally closed, (NC),
designers and installers need stock only one device for universal power control. Multiple Operation Modes as Below.
AN52: Standard Operation Mode
AN53: Other Operational Varients
AN54: Security Key Model
AN55: Sensor Type Applications
AN56: Power Fail Detect.
WHERE IS THE EASYswitch USED
Audio, Home Theatre, Lighting, Security and Automation equipment all benefit from the remote switching provided by the
Legally and safely switch mains power without electrician wiring. 1000's are in use throughout Australia by the electrical and electronic industry.
HOW IS THE EASYswitch USED
1/ Connect the IEC C14 plug to the mains 240 volt A.C. power.
2/ Connect the load to the IEC C13 socket.
3/ Attach signal wire or similar to the control terminals.
4/ Run the control wire to the remote switch mechanism.
5/ Switch on source of 24O volt power.
6/ GREEN LED indicates power on and the load de-energised.
7/ Short remote control contacts terminals of the EASYswitch
8/ RED LED indicates active out and the load energised.
- We Design and Manufacture Professional Electronic Equipment
- Trusted supplier to Government, Industry and Consumers for 40 years
- Buy with Confidence from Australian Designer and Manufacturer.
- ANY ENQUIRIES PLEASE EMAIL firstname.lastname@example.org